Portman P1 Retro Lamp
- 7 DMX channels
- 7 x 230W halogen lamps
- Built in dimmers and electonics
- 3- and 5-PIN XLR connectors
- RDM and WDMX* (*optional module)
- Can be easily installed on any tripod or hang on any clamp
Portman P2 EVO
With six vertically arranged attractive light cells, the Portman P2 EVO RGBW LED Linear Accent Light is sure to create an eye-catching stream of light on stages and in studios, with a similar form factor to its Hexaline tungsten equivalent. Each cell uses advanced warm white LEDs, which are supplemented by RGBW LEDs to add a soft color-variable glow. It can link to multiple units to pass through both power and DMX control signals.
A six-section linear configuration of LED sources gives the P2 EVO a near-identical look to its tungsten counterpart. The color capabilities of the LED cells are veritably modern, yet the tubular 60W light sources contained within mimic warm-white halogen bulbs for a recognizably retro appearance. While these sources are adjustable only within a 1600-3200K tungsten color temperature range, they are backed up by a dynamic display of full-color spectrum light. This effect is achieved by 12W LEDs hidden behind the tungsten-type bulbs to provide consistent glows of a wide range of hues. Their red/green/blue/white configuration ensures a consistent rendition of cover across the entirety of their dimming range. The light bends on two adjustment points along its center column, allowing the P2 EVO to flex into curved positions. The included mounting adapters allow the light to be safely placed on stage or rigged overhead to take full advantage of its design when arranged in an array with other fixtures.The P2 EVO operates using modern systems familiar to most lighting techs and stage designers. Located on the rear of the unit is a convenient OLED display with four tactile buttons for navigating menus to set color, intensity, and other parameters to fit the needs of the production. As the p1 EVO is equipped with the Portman Color Feedback System, the buttons are backlit by RGB LEDs and will indicate a variety of current settings for hands-free monitoring of the light. When operating the fixture at a distance is preferable, a 5-pin XLR input is available for controlling these same settings as well as programmed macros using one’s DMX control surfaces; a DMX output also allows for daisy-chaining up to 32 units at once. With the purchase of an optional wireless module, the P2 may also be operated via WDMX.
Proplex GBS EZ-LAN Unity 20
EZ-LAN makes today’s complex show networking easier and accessible for everyone. These simple to operate yet powerful Gigabit Ethernet switches distribute up to four discrete networks – lighting, audio, content, server, console, or communications – quickly, effortlessly, and simultaneously. Users untrained in the complexities of managed networking can easily isolate networks and access and change VLAN assignments with a single button press. With 16 ports, assignable in up to four separate groups, EZ-LAN is a revolutionary addition to the ProPlex Data Distribution range of multiple format data management systems, all designed and built to withstand “Life on the Road.”
- EZ-User configurable, high-throughput Gigabit Switch
- Simultaneously separate and distribute up to four discrete networks – e.g lighting, audio, media, content, console, communications – with a few button presses
- Two EZ-LANs do the work of up to 8 unmanaged Gigabit switches
- 16 ports assignable in up to four, four-port groups
- Add a second fibre or copper connection for automatic redundancy and twice the speed
- 16 EtherCon LAN ports, 2 EtherCon Trunk ports, 2 OpticalCon Trunk ports (Quad standard. Duo optional)
- Compatible with a wide range of entertainment-specific protocols, including AES67, ArtNet, Dante, GreenGo, HippoNet, HogNet, Livewire, MA-Net 2/3, Q-LAN, RAVENNA, RDMNet, sACN, and more!
Proplex IQ Two 1616
- High-power processor for glitch-free data conversion, patching and merging of up to 16 Universes
- Powerful yet intuitive feature set, control, management, via on-board LCD, Browser Interface, or ProPlex Software
- Full-featured ProPlex Software option for management of the largest networks
- Dual EtherCon ports allow very low latency linking of units and, with GBS and EZ-LAN, ring topology for speed and redundancy
- PoE power-in option for convenience or dual-power redundancy
- Merge ArtNet or Streaming ACN from multiple sources
- Full bi-directional RDM functionality. Input or output on any DMX connector.
- Rugged, tour-ready ProPlex “Blue Box” construction
Proplex IQ Two 88 2x 8-Way Ethernet-DMX Node
- High-power processor for glitch-free data conversion, patching and merging of up to eight universes
- Powerful yet intuitive feature set, control, management, via on-board LCD, Browser Interface, or ProPlex Software
- Dual EtherCon ports allow very low latency linking of units and, with GBS and EZ-LAN, ring topology for speed and redundancy
- PoE power-in option for convenience or dual-power redundancy
- Merge ArtNet or Streaming ACN from multiple sources
- Full bi-directional RDM functionality. Input or output on any DMX connector.
- Rugged, tour-ready ProPlex “Blue Box” construction
Reel EFX DF-50 Hazer
The Diffusion Hazer (DF-50) is a patented machine utilizing a triple filtered system that breaks down the Diffusion Fluid (food grade mineral oil blend) to a uniform 1 micron sized droplet. CAL/OSHA has concluded that these airborne mist levels do not exceed OSHA or CAL/OSHA
Richard Martin Jarag – L
- Integrated dimmers | 200 230V / 50-60Hz / 1,6A/ 375W
- 5 halogen lamps
- Standard DMX 5-pin In/Out
- 5 PAR30 lamp linear array
- Each lamp in the array is controlled independently via DMX channel
- On/Off switch
- Units can be stacked to from larger arrays
- Max. vertical bar of 12 Jarag-L units (70kg)
- Max. horizontal bar of 50 Jarag-L units (300kg)
- 1.6A @ 200-230V
- Number of Channels | 5 DMX Channels Selection
Robe BMFL Blade
Four fast shutter blades with smooth and precise movement in the new BMFL Blade lighting fixture. Individually angled and positioned within a frame – which itself can rotate through 90 degrees. Gobo images can be trimmed or framed in a regular, triangular or trapezoid shape. Each pair of opposing blades can close to a complete blackout. This fixture also features two gobo wheels – one rotating with six slot & lock gobo positions plus another with 8 static gobos can be combined with the Animation wheel to create numerous dynamic effects. Add all this to the already acclaimed BMFL features including: smooth linear dimming, high definition color mixing, full width beam, output in excess of 250,000 lux at 5 meters, and the Robe EMS™ (Electronic Motion Stabilizer) technology.
- Precision framing shutters
- Powerful 250,000 lux at 5 meters
- Animation Wheel
- Exceptional color mixing with 2 color wheels
- Three lamp modes (1700w, 1500w, 1200w)
- Linear and Circular Prisims
- Weighs just under 84lbs
Robe BMFL FollowSpot
Created specifically for follow-spot operation, this custom modified version of BMFL comes with specific features to provide both motorised movement and manual operation with follow-spot handles. Based on the powerful BMFL WashBeam it blasts beams of extra bright output and has an abundance of great features.
The BMFL FollowSpot takes advantage of its wide 160 mm front lens and a high CRI 1700W lamp. With a custom light source designed for Robe it produces an astounding 251.000 lux at 5 metres and has a wide zoom range of 5° to 45° with precise focusing. Manually or remotely controllable features include smooth color mixing and CTO flags, two color wheels, multiple variable frost filters, focus, zoom and quick pulsing iris. Follow-spot operation can be extended by using LightMaster handles – an optional accessory.
The BMFL FollowSpot is pre-wired for installation of the digital camera on the head and is connected with the new RoboSpot base station for off-stage follow-spot operation.
Robe BMFL FollowSpotLT
Further adding to the ground breaking RoboSpot system, the FollowSpot LT is designed for the larger venue that requires a longer throw distance, tighter beam and greater output power. The LT is the same size and weight as the standard BMFL FollowSpot, which is substantially smaller than other products of similar power. The proprietary optical design provides a 8:1 zoom ratio (1 – 8 degrees) and an output exceeding 455,000 lux at 5 metres.
Like the standard BMFL FollowSpot, the LT can be operated as a manual, stand-alone follow spot using the Robe LightMaster-Side and LightMaster-Rear control kits. Similarly, the LT can be operated remotely using the Robe RoboSpot MDC remote follow spot system and is pre-wired for the Digital Camera.
Packed with all the features you would expect from a BMFL series product, including, imperceptible colour mixing, fixed colour filters, 6000K native colour temperature, Cri>92, Variable CTO to 2700 & CTB to 9000K, fixed & variable frost filters, focus, zoom and a fast iris.