Portman P1 Retro Lamp
- 7 DMX channels
- 7 x 230W halogen lamps
- Built in dimmers and electonics
- 3- and 5-PIN XLR connectors
- RDM and WDMX* (*optional module)
- Can be easily installed on any tripod or hang on any clamp
Portman P2 EVO
With six vertically arranged attractive light cells, the Portman P2 EVO RGBW LED Linear Accent Light is sure to create an eye-catching stream of light on stages and in studios, with a similar form factor to its Hexaline tungsten equivalent. Each cell uses advanced warm white LEDs, which are supplemented by RGBW LEDs to add a soft color-variable glow. It can link to multiple units to pass through both power and DMX control signals.
A six-section linear configuration of LED sources gives the P2 EVO a near-identical look to its tungsten counterpart. The color capabilities of the LED cells are veritably modern, yet the tubular 60W light sources contained within mimic warm-white halogen bulbs for a recognizably retro appearance. While these sources are adjustable only within a 1600-3200K tungsten color temperature range, they are backed up by a dynamic display of full-color spectrum light. This effect is achieved by 12W LEDs hidden behind the tungsten-type bulbs to provide consistent glows of a wide range of hues. Their red/green/blue/white configuration ensures a consistent rendition of cover across the entirety of their dimming range. The light bends on two adjustment points along its center column, allowing the P2 EVO to flex into curved positions. The included mounting adapters allow the light to be safely placed on stage or rigged overhead to take full advantage of its design when arranged in an array with other fixtures.The P2 EVO operates using modern systems familiar to most lighting techs and stage designers. Located on the rear of the unit is a convenient OLED display with four tactile buttons for navigating menus to set color, intensity, and other parameters to fit the needs of the production. As the p1 EVO is equipped with the Portman Color Feedback System, the buttons are backlit by RGB LEDs and will indicate a variety of current settings for hands-free monitoring of the light. When operating the fixture at a distance is preferable, a 5-pin XLR input is available for controlling these same settings as well as programmed macros using one’s DMX control surfaces; a DMX output also allows for daisy-chaining up to 32 units at once. With the purchase of an optional wireless module, the P2 may also be operated via WDMX.
Robe ColorStrobe RGBW
Power is everything, now in color!
Add colour into your blinding strobing sequences with the ColorStrobe to achieve dyed effects, white flashing with colourful backgrounds or continuous bright light output with coloured animations.
While the ColorStrobe is controllable, configurable and arrayable into stacks of multiple units, the ColorStrobe Lite is a single hanging fixture with reduced weight.
Super fast bursts of high-powered pulses can be adjusted in frequency, duration and intensity, optically harnessed from the 120x High Power RGBW multichips. Easy to rig individually or in multiples and easy to program, using direct segment control or the pre-defined macros.
The ColorStrobe has a splash proof housing that can temporarily be exposed to rain when installed on the front truss, used as a floodlight or a wall washer.
Robe CykFX 8
All the amazing features and performance of the award winning Robe LEDWash luminaires in a 1000 mm moving linear strip.
An array of individually controlled 15W RGBW LED modules equally spaced along the strip with fully adjustable zoom from 8-67 degrees. The strip itself has a very fast 270 degree tilt movement which can be precision indexed or programmed to produce rapid sweeping movements.
Pre-programmed colour macros and pixel control makes this fixture quick and easy to programme. Tungsten lamp emulation and fade effects at 2700 K and 3200 K are included. Wireless technology CRMX is available as an option.
Robe Esprite
Robe, the recognised leader in moving light technology, has made another major leap in innovation. The new ESPRITE™ Profile LED automated luminaire has a fast-change, low-cost, transferable light engine ingeniously solving the problem of performance longevity for those preferring the higher brightness of white source LEDs as an obvious replacement for their aging stock of discharge workhorses.
With our unique, ground-breaking TRANSFERABLE ENGINE technology, you have a choice of engines. The TE™ 650W HP White LED Engine (HP – High Performance), producing the highest output possible, or the TE™ 650W HCF White LED Engine (HCF – High Colour Fidelity) for those requiring exceptional colour quality. Now you can fit either engine within the same fixture, without alignment or warranty issues, within five minutes! Without the expense, and complication of needing to have separate luminaires with differing sources, TRANSFERABLE ENGINES give you the right engine, in the right fixture, at the right time!
The revolutionary self-referencing, data capturing engines are all designed, developed and manufactured within our own factory (Patents pending). Performance has not been compromised, with the TE™ 650W HP White 6.700 K LED Engine producing a piercing 34.000 lm and the TE™ 650W HCF White 6.000 K LED Engine 24.000 lm with its exceptionally high inherent CRI of 97. The L70/B50 ratings of 50.000 hours, means longevity is assured.
This is enhanced by our legendary precision optics to produce crystal clear white light. The comprehensive feature set includes: Flat field CMY mixing; variable CTO; remotely selectable CRI 70/80/90 (HP Engine); two fast colour wheels; rotating and static gobo wheels; 6-facet rotating prism; 1° soft edge and 5° even wash frosts; an animation wheel and spectacular multi-colour effects. Quick, accurate, easy framing is provided via our patented fast framing shutter module with individual blade control and +/-60° rotation capability for extra fine control. The ESPRITE™ Profile by design removes any airflow over the optics, resulting in reduced residue deposits thus extending periods between cleaning.
Furthermore, the unique Hot-Spot feature allows you to move from a flat field beam to a 6:1 ratio hot-spot beam giving uniform intensity when overlaying beam edges to create smooth washes of light. The Cpulse™ flicker-free management system operates beautifully with the latest HD and UHD camera systems, and our L3™ Low Light Linearity dimming for ultra-smooth fade to black for seamless integration into traditional lighting rigs.
Robe Footsie1 TW
Time to uplift your footlights and make those feet shine! With its sleek, low design, our IP65-rated FOOTSIE takes footlights into the modern age.
Available in classic, balletic-like Warm White with a CRI greater than 90; tuneable white from 2.700K – 6.500K, or RGBW for all colours, including infamous up-lit horror looks, the IP65-rated FOOTSIE delivers LED foot lighting, whatever the production type or weather.
Removing the visual barrier between audience and performer, this showstopper, with its low laying 52 mm high design, allows you to see all of the performer and watch those toes ‘tapping!
The self-contained cable tray removes loose laying cables, taking away this trip hazard. With an easy, fast connection between fixtures, including corner pieces of various angles, FOOTSIE keeps the LEDs evenly spaced to provide the smoothest wash with continuous runs across your stage or down your runway.
For run flexibility, FOOTSIE is available in two models. FOOTSIE1™ has two individually controlled zones within its 600 mm, while FOOTSIE2™ being longer at 1.200 mm, has four zones.
FOOTSIE features an innovative SPREAD™ (Shield Protection, Reflection Elimination, Diffusion) Integrated shield that folds inside housing or be released and installed in position. The Shield is covering direct viewing of the led sources from the side of audience (Patent pending). Providing additional softening and beam spread control optional, easily insertable Medium and Wide diffusion filters are available.
The patented design provides easy and instant access through the top and bottom lids to the fixture display, power supply and other cables, such as microphone or monitor speakers. We have included half circular ports in the top and base lids, giving access to these wherever needed on the stage. Power and data connections are via IP65-rated PowerCON True1 and DMX 5-pin IN and OUT connectors.
By including NFC (Near-Field Communication) technology, you can access setup, diagnostic and performance features, even without power, directly from your mobile device using the Robe Com app.
A unique safety feature, BluMark™ allows a low-level blue LED indication of stage edges without affecting lighting states. These separate, low-output LEDs provide an edge indication when performers become blinded due to snap blackouts. Controlled from your console, BluMark™ can be turned on/ off as required.
Convectionally cooled, FOOTSIE is perfect for theatres, concert stages, fashion show catwalks or corporate events, letting your performers step out in style, indoors or out!
Robe Footsie2 TW
Time to uplift your footlights and make those feet shine! With its sleek, low design, our IP65-rated FOOTSIE takes footlights into the modern age.
Available in classic, balletic-like Warm White with a CRI greater than 90; tuneable white from 2.700K – 6.500K, or RGBW for all colours, including infamous up-lit horror looks, the IP65-rated FOOTSIE delivers LED foot lighting, whatever the production type or weather.
Removing the visual barrier between audience and performer, this showstopper, with its low laying 52 mm high design, allows you to see all of the performer and watch those toes ‘tapping!
The self-contained cable tray removes loose laying cables, taking away this trip hazard. With an easy, fast connection between fixtures, including corner pieces of various angles, FOOTSIE keeps the LEDs evenly spaced to provide the smoothest wash with continuous runs across your stage or down your runway.
For run flexibility, FOOTSIE is available in two models. FOOTSIE1™ has two individually controlled zones within its 600 mm, while FOOTSIE2™ being longer at 1.200 mm, has four zones.
FOOTSIE features an innovative SPREAD™ (Shield Protection, Reflection Elimination, Diffusion) Integrated shield that folds inside housing or be released and installed in position. The Shield is covering direct viewing of the led sources from the side of audience (Patent pending). Providing additional softening and beam spread control optional, easily insertable medium and wide diffusion filters are available.
The patented design provides easy and instant access through the top and bottom lids to the fixture display, power supply and other cables, such as microphone or monitor speakers. We have included half circular ports in the top and base lids, giving access to these wherever needed on the stage. Power and data connections are via IP65-rated PowerCON True1 and DMX 5-pin IN and OUT connectors.
By including NFC (Near-Field Communication) technology, you can access setup, diagnostic and performance features, even without power, directly from your mobile device using the Robe Com app.
A unique safety feature, BluMark™ allows a low-level blue LED indication of stage edges without affecting lighting states. These separate, low-output LEDs provide an edge indication when performers become blinded due to snap blackouts. Controlled from your console, BluMark™ can be turned on/ off as required.
Convectionally cooled, FOOTSIE is perfect for theatres, concert stages, fashion show catwalks or corporate events, letting your performers step out in style, indoors or out!
Robe Forte
Forte means Excellence, Speciality, Strength. Our FORTE® certainly lives up to its name! With a choice of premium performance engines from our revolutionary TRANSFERABLE ENGINE technology, giving you the ability to maintain light quality, combined with a fixture packed full of specialist innovation, you have the luminaire ready to lead you into the future.
You can now choose between the TE™ 1.000W HP White LED Engine (HP – High Performance), producing the highest output possible, or the TE™ 1.000W HCF White LED Engine (HCF – High Colour Fidelity) for those requiring exception colour quality. Now you can fit either engine within the same fixture, without alignment or warranty issues, within five minutes! Without the expense, and complication of needing separate luminaires with differing sources, TRANSFERABLE ENGINES give you the right engine, in the right fixture, at the right time!
The revolutionary self-referencing, data capturing engines are all designed, developed and manufactured within our own factory (Robe patented technology). Performance has not been compromised, with the TE™ 1.000W HP White 6.700 K LED Engine producing a piercing 50.000 lm and the TE™ 1.000W HCF White 6.000 K LED Engine 35.000 lm with its exceptionally high inherent CRI of 96. The L70/B50 ratings of 50.000 hours, means longevity is assured.
Harnessing the strength of the self-referencing, data capturing TRANSFERABLE ENGINES, FORTE® has wide ranging 5 – 55 degree zoom capability to fulfil all your spot, wash and beam applications, contained within its class-leading 41 kg frame. Usual output loss at the narrow zoom setting is taken care of via our ingenious Robe Patent pending narrow zoom output boost, improving performance by over 15 %, giving you a dramatically increased output, perfect for sabre like beams.
Robe’s new, cutting-edge, CMY colour mixing system provides beautifully smooth colour transitions. Combined with two colour wheels, CRI 80 and 90 filters (HP Engine), and a variable CTO from 3.000 – 6.700 K gives FORTE® total colour finesse.
The comprehensive, dynamic effects package includes; two fully indexable, rotatable gobo wheels each with 6 gobos using the fast change Robe slot and lock system; two stackable 6-facet prisms, one linear, one round; animation wheel and an ultra-fast motorized iris. The two rapid insert interchangeable frosts, a soft 1° and a medium 5° for silky smooth washes cover the entire zoom range of 5-55 degrees with no restricted range cut off.
FORTE® gives you total control via our ultra-precise patented framing shutter system, with separate blade control and the entire assembly capable of +- 60° rotation; Cpulse™ PWM control and direct Plus/Minus Green control for broadcast precision; EMS™ (Electronic Motion Stabiliser) technology, for instant stop and hysteresis elimination, making FORTE® the ideal fixture for RoboSpot™; L3™ (Low Light Linearity) dimming producing imperceptible fades to black.
FORTE® possesses a comprehensive protocol suite; USITT DMX 512, RDM, ArtNet, MA Net, MA Net 2, and sACN. REAP™ (Robe Ethernet Access Portal) is included for direct communication over Ethernet networks. DMX Wireless control is available on request. All this allows seamless integration into all control networks.
Robe Halo RGB Driver
Halo – a new exciting dimension in led pixel lighting for stage and set. A circle of encapsulated bright micro-pixel led’s, mounted on a standard size Parcan colour frame, Halo can bring the classic fixtures back into the latest lighting designs or be used alone to add many new dimensions and effects. Controlled via DMX, the operator can quickly and simply program the most sophisticated effects using the internal content generator or switch to display pixel mapped video content. The system consists of 6 frames of RGB led’s and a 6 way data controller/driver in the familiar colour-scroller truss-hanging format. The system is interconnected using the industry standard 4pin XLR scroller cables that are already part of most lighting company inventories.
Robe iForte
Even the mighty need the right protection! With unique game-changing patented technology, you can shift the power outside, rain or shine, dust, smoke and haze, with the iFORTE®!
The most powerful member of the Robe iSeries, the IP65-rated iFORTE® combines far-reaching output and feature-rich effects in a fully protected package, capable of handling all the challenges of being outdoors.
iFORTE® negates the traditional weight penalty associated with IP-rated fixtures being only 1.5 kg heavier than the indoor FORTE®. With its class-leading form factor, size and appearance, and all the features and identical performance of the indoor original, iFORTE® enables seamless integration with each other, even on the same truss if desired!
The ingenious ingress protection system has been specifically designed to allow standard maintenance and preparation procedures, such as TRANSFERABLE ENGINE exchange and gobo replacement without any additional tools, as gobo change or maintenance work can be done on-site.
The onboard RAINS™ (Robe Automatic Ingress Neutralization System) manages humidity, temperature and pressure control using an active monitoring system to automatically remove any moisture detected within the fixture and provides constant monitoring to ensure peak performance. iFORTE® automatically runs a self-test every time it senses a cover was removed and replaced. This self-test, taking no more than 3 minutes, provides an error message if covers were not replaced correctly or locking screws were incorrectly tightened (Patent pending).
Their lightweight magnesium alloy covers, with aluminium alloy structure, provide a dust-free environment for the optics, eliminating the need for frequent cleaning, routine maintenance, and UV damage to plastic parts.
To maintain consistently high lumen output, even with the rigours of outdoor performance, water, dirt, dust, haze, and smoke are repelled from the front lens with our unique parCoat™ hydrophobic, oleophobic resistant coating. Furthermore, it allows easy removal without scratching or damage.
By including NFC (Near-Field Communication) technology, you can access setup, diagnostic and performance features, even when the fixture is not powered, directly from your mobile device using the Robe Com app.
iFORTE’s TE™ 1.000W iSE HP (High Performance) White LED TRANSFERABLE ENGINE generates the same, piercing 50.000 lumen fixture output. The identical 11:1 zoom optical system, with a 5.5° to 55° zoom range, provides all the flexibility you require.
Removing the need for distracting pre-use pan and tilt calibration movement, our patented MAPS™ (Motionless Absolute Positioning System) allows the fixture to fully calibrate while remaining static. Very useful when fixtures are located within confined spaces.
Our cutting-edge CMY colour mixing system provides beautifully smooth mixing and transitions. Combined with two colour wheels, CRI 80 and 90 filters (HP Engine), and a variable CTO from 3.000 – 6.700 K give iFORTE® total colour finesse.
With the patented Plano4™ four individual plane framing shutters, two fully indexable rotating gobo wheels, an animation wheel, two independent 6-facet prisms and two MagFrost 1° and 5° frosts, you have all the creative tools you need.
Keeping up with technological advances, we have incorporated Epass™ for maintaining network connectivity, and for television users, Cpulse™ is included for flicker-free management of HD and UHD camera systems.
iFORTE® is fully compatible with our industry-leading RoboSpot™ remote-controlled follow spot system.
iFORTE® – Robe reliability in all weathers.