+1 (562) 800-0133|ryan@felixlighting.com

Consoles

MA NPU

ma_npu

With an easy to read touchscreen the MA NPU allows intuitive use and easy access to all the important information. 8 x DMX XLR 5-pin connectors on the rear side of the MA NPU allow a most flexible use within the network environment.

The MA NPU  is the link between Ethernet and DMX controlled devices. The MA NPU adds processing power and parameters to the MA system. For decentralized DMX networks, the MA NPU converts incoming Ethernet data into DMX data. The converted data are transmitted via 8 independent DMX connectors, which can be configured as DMX inputs or outputs.
Within a network, several grandMA2 consoles share the available MA NPU devices. For parameter expansion the MA NPU shall be located in a centralized position, whereas MA xPort Nodes are used to distribute and output DMX data.This allows DMX devices being used by several consoles together, and it provides a redundant mode of operation without additional components such as DMX mergers.

MA NPU2021-10-11T13:20:25-07:00

MA NSP

nsp2

For decentralised DMX networks, the MA NSP (Network Signal Processor) converts the incoming Ethernet data into DMX512-A data. For data conversion, two Ethernet protocols are supported: MA-Net and Art-Net.

Data output is by means of four independent DMX connectors, two of which can also be configured as DMX inputs. The MA NSP features an intuitive menu structure, four function keys and an encoder wheel for easy configuration. A backlit LC-display with two lines of text shows all of the important information and the operating status. For professional application and maximum flexibility, the MA NSP is built in a 19” housing which is only 1U in height.

You may choose between different modes of operation when using the MA NSP. Depending on your application, a MA NSP can convert DMX inputs and outputs in an Ethernet network, serve as a DMX merger or booster, or even expand your grandMA System by additional parameters. In conjunction with grandMA2 consoles, the MA NSP can also work as a 4PortNode.

In an MA System, the MA NSP can be used as a decentralised channel expansion for all grandMA consoles (except grandMA micro + grandMA pico). For this purpose, not only the DMX signals are distributed among the MA NSP, but so are all calculations necessary. With MA NSP, the grandMA console becomes a powerful multi-processor system. The fast, bidirectional data exchange between the grandMA console and the MA NSP ensures that DMX data output on all MA NSP units is perfectly synchronized. Each MA NSP can calculate 2,048 parameters. A maximum of 16 MA NSP can be used for the output of 64 DMX lines (32,768 channels).

In a network, several consoles share the MA NSPs available. This easily allows the shared use of DMX enabled devices as well as provides for a redundant mode of operation without additional components such as DMX mergers.

Any MA NSP connected to grandMA onPC allows the software to send “real” DMX data. A total of two MA NSP can be connected to a grandMA onPC.
This converts grandMA onPC into a full-featured lighting control system for up to 8 DMX lines. When used in a shared network with a grandMA lighting console and one or more MA NSPs, grandMA onPC becomes a full-tracking backup system for up to 16,348 parameters.

MA NSP2021-10-11T13:20:40-07:00

MA onPC Command Wing

gma2CommandWing

The MA onPC command wing paves the way for mobile use of the highly flexible and powerful grandMA2 control system. In combination with the free of charge grandMA2 onPC software, the MA onPC command wing is a portable 2,048 parameter control solution that can be used in nearly any location – and all for an affordable price. It offers two built-in DMX ports as well as the possibilty to send two additional DMX universes via Ethernet.

Designed as the perfect hardware expansion to the grandMA2 onPC software, the MA onPC command wing enables the look and feel of the software to be as close to a real grandMA2 console as possible. Thanks to the MA onPC command wing – incorporating the command section of the grandMA2 consoles – it has never been easier to use the grandMA2 onPC software. With a simple USB connection between the MA onPC command wing and the computer running the grandMA2 onPC software, all inputs and outputs of a grandMA2 console are available to the user. DMX, Midi, Timecode and Analogue Remote are all on hand directly at the MA onPC command wing.

Wherever it is physically difficult to use a grandMA2 console, the MA onPC command wing, in conjunction with the grandMA2 onPC software, enables the customer to program or playback within the grandMA2 world. Therefore the MA onPC command wing is ideal to be used as a backup solution within the grandMA2 system, as powerful control solution on the road or for smaller theatres, shows and clubs or for preprogramming.

It is also possible to add more faders by connecting the MA onPC fader wing to the MA onPC command wing. Moreover the MA onPC fader wing provides additional 2,048 parameters and four DMX lines. The MA 8Port Node onPC and MA 4Port Node onPC will add 2,048 parameters and eight or four DMX lines respectively.

MA onPC Command Wing2021-10-11T13:22:12-07:00

Obsidian Onyx NX1

The NX1 is the essential lighting controller in the innovative and powerful ONYX platform. Fully featured and unrestricted if offers the complete ONYX experience without compromises in an ultra-compact package.

Utilizing the full ONYX Operating System the NX1 includes a high-brightness 10.1″ HD multi-touch screen; 4 assignable parameter encoders; 10 full motorized playbacks with four freely assignable buttons plus and extra playback and function key hybrid array. A dedicated Master Go section rounds out the efficient front panel design.Including the latest in industrial components the NX1 contains a powerful new Intel processor, high speed NVMe SSD drive and 8GB of DDR4 RAM, allowing fast boot times, instant operation and the ability to process 8 Universes right inside the console. With four DMX ports, a Gigabit network port for up to 8 Universes of Art-Net, sACN plus the ONYX X-Net protocol the NX 1 has ample connectivity and power for a wide variety of shows and applications. One additional touch monitor is supported for even more direct access at anytime.

The NX1 is further expandable with the dedicated NXK keypad and the NXP motorized playback wing. A simple magnetic alignment system allows attachment on either side of the NX1. The keypad and playback wing are part of the ONYX platform and can be utilized with all other NX devices or ONYX on any PC system.

Obsidian Onyx NX12025-09-16T09:29:14-07:00

Obsidian Onyx NX2

The NX2 is the ultimate compact yet powerful fully integrated lighting controller. As a member of the innovative ONYX platform from Obsidian Control Systems the NX2 is feature rich and never restricted inits capabilities. NX2 includes a high-brightness full HD multi-touch screen; 8 assignable parameter encoders;an assistive mini touch-screen; full keypad and command section; a dedicated grandmaster and 10 full playbacks with four freely assignable buttons.

Utilizing the latest in industrial components the NX2 contains a powerful new Intel Hexa-Core processor, high speed NVMe SSD drive and 16GB of DDR4 RAM. Fast boot times, instant operation and the ability to process 64 Universes right inside the console without the need for costly external processing networks result in unprecedented power in this form factor.

The NX2 is ergonomic with its compact footprint, full ONYX command and keypad section and the bright adjustable HD touch screen. It is always ready to run the largest shows and events at a moments notice.

With four DMX ports, Timecode, Midi and dual Gigabit ports for up to 64 Universes of Art-Net, sACN plus the ONYX X-Net protocol the NX 2 has all the connectivity and power the ever-increasing sizes of shows demand. Two additional 4K touch monitors are supported for even more direct access at anytime.

Obsidian Onyx NX22025-09-16T09:23:39-07:00

Obsidian Onyx NX4

The NX4 is a comprehensive feature packed control surface. With a well-arranged combination of motorized and manual faders as well as an array of playback button the NX4 offers 44 total playbacks in a compact yet extremely powerful package. As a member of the innovative ONYX platform from Obsidian Control Systems the NX4 is feature rich and never restricted in its capabilities. NX4 includes a high-brightness full HD multi-touch screen; 8 assignable parameter encoders; dedicated Intensity encoder; an assistive mini touch-screen; full keypad and command section and a dedicated grand master.

Two independent playback sections offer instant access. The main playback with 10 motorized faders plus 10 play-pairs allows for quick page changes while the sub playback with 12 faders and 12 button playbacks allows important cues to always be at the user’s fingertips.

Utilizing the latest in industrial components, the NX4 contains a powerful new Intel Hexa-Core processor, high speed NVMe SSD drive, and 16GB of DDR4 RAM. Fast boot times, instant operation and the ability to process 64 Universes right inside the console without the need for costly external processing networks result in unprecedented power in this form factor.The NX4 is ergonomic with its motorized playback faders, short depth, easy screen access, full ONYX command and keypad section and bright adjustable HD touch screen. It is always ready to run the largest shows and events at a moment’s notice.

With four DMX ports, Timecode, Midi and dual Gigabit ports for up to 64 Universes of Art-Net, sACN plus the ONYX X-Net protocol the NX4 has all the connectivity and power the ever-increasing sizes of shows demand. Two additional 4K touch monitors are supported for even more direct access at any time.

Obsidian Onyx NX42025-09-16T09:21:34-07:00
© 2021 Felix Lighting | All Rights Reserved
Go to Top