+1 (562) 800-0133|ryan@felixlighting.com

Lighting

GLP JDC-1

The JDC1 contains a traditional single tube element with an incredible clear, bright white output and combines that with a surrounding full face of RGB LED power, utilizing 1.320 high quality LED’s. The possibilities are endless as these two elements have independent control and can be used as separate pieces, or combined for stunning effects.
Along with working as a powerful strobe light, both the tube and the full face sections can be run continuously for high output blinder and wash light effects, which never reduce output or have thermal cutouts.

To give even more functionality, the RGB face can be divided into 12 separate ‘plate’ sections, and additionally the bright white tube also can be divided into 12 sections and then the whole array can be fully pixel mapped through any standard controller.

The JDC1 also features dynamic movement with a 16 bit, 185° tilt range, allowing you to place effects exactly where and when you want them to be – and get the most possible power and impact.

The JDC1 is a whole new class of strobe that offers an incomparable feature set that goes way beyond the definition of a hybrid.

The JDC1 is hybrid redefined.

GLP JDC-12021-10-11T12:32:58-07:00

GLP JDC Burst 1 IP

The GLP JDC Burst 1 is the next step in the development of innovative Hybrid LED Strobe lights. Building on the success of the JDC1 and inspired by the technology of the groundbreaking JDC2 IP, the JDC Burst 1 was designed as a powerful successor to the JDC1, setting new standards in brightness, color variety, and flexibility. With its robust construction and IP65 protection, it guarantees top performance under the most demanding conditions.

This powerful device features a 12 segment-controlled white strobe line and two RGBW LED plates that enable stunning color effects. Thanks to the motorized 185° tilt and precise control of 1,200 RGBW LED pixels, divided into 48 segments with 5 x 5 pixels each, dynamic lighting effects can be created, transforming any stage into a visual spectacle.

The new, extremely bright white strobe LEDs are significantly brighter compared to the proven JDC1, providing intense flashes with outstanding punch. At the same time, the powerful RGBW LEDs offer an extended color gamut – including delicate pastels and rich colors. Color performance has been significantly improved compared to the JDC1: +120% in red, +60% in green, and +30% in blue PLUS extra white!

Thanks to its sealed IP65 system, the JDC Burst 1 is protected not only against rain influences, but also against pyro and confetti residues. While conventional devices can draw in particles through ventilation and require maintenance, the JDC Burst 1 remains largely maintenance-free and reliably durable due to its sealed housing.

The multi-patch function and flexible control options via DMX, ArtNet, sACN, and GLP iQ.Mesh ensure easy integration into any lighting setup. Weighing only 14 kg and equipped with ergonomic carrying handles, the JDC Burst 1 is highly mobile and easy to handle. Thanks to its versatile mounting options, such as Camlock quick-release fasteners on the arm for vertical mounting, it can be effortlessly integrated into a wide range of setups. Whether used as a powerful strobe, creative wash light, or dynamic effect light, this versatile device maximizes creative possibilities and elevates stunning light shows to the next level.

GLP JDC Burst 1 IP2025-12-22T10:04:27-07:00

GLP JDC Line 500

The JDC Line is the new Hybrid highlight Product from GLP and combines a powerful strobe line with a never seen powerful LED pixel mapping device. There are a lot of Pixel-Mapping/Video-Sticks in the market but they all just offer the brightness of a typical video stick and the pixelpitch always has black areas between the pixel segments. The JDC Line is completely different and offers a much brighter RGB Pixel mapping effect mixed by a special 500 mm lens tube which gives great look and new design options.

The pixel sements of the JDC Line measures The pixel sements of the JDC Line measures 25 mm in width. The segments are seemless next to each other, so that there are no blackout areas between the pixels. A super highlight feature: Each pixel segment can be split into upper and lower part which gives additional creative options. The second part of the fixture is a powerful strobe tube, well known from the JDC center beam LEDs. The JDC Strobe LEDs emit into the same lens tube as the RGB Pixel Mapping LEDs and also offer a segmentation of 25 mm for stunning dynamic effects. The idea to emit the powerful strobe and the RGB Pixel mapping output through the same lens tube creates a very nice look and avoids seeing ugly separate LEDs or light reflections from white face LEDs.

The smart rigging accessories such as rigging bracket and alignment bracket provide a convenient handling of the product. The smart rigging accessories such as rigging bracket and alignment bracket provide a convenient handling of the product. Using the alignment bracket, multiple devices can be easily mechanically connected together while the rigging bracket allows an installation of rigging clamps on the top, button, and back side of the product. A clever airflow design allows the cooling of the fixture also when lying on the ground, installed between objects or on top of each other.

GLP JDC Line 5002025-12-16T14:06:13-07:00

GLP JDC Line 1000

The JDC Line is the new Hybrid highlight Product from GLP and combines a powerful strobe line with a never seen powerful LED pixel mapping device. There are a lot of Pixel-Mapping/Video-Sticks in the market but they all just offer the brightness of a typical video stick and the pixelpitch always has black areas between the pixel segments. The JDC Line is completely different and offers a much brighter RGB Pixel mapping effect mixed by a special 500 mm lens tube which gives great look and new design options.

The pixel sements of the JDC Line measures The pixel sements of the JDC Line measures 25 mm in width. The segments are seemless next to each other, so that there are no blackout areas between the pixels. A super highlight feature: Each pixel segment can be split into upper and lower part which gives additional creative options. The second part of the fixture is a powerful strobe tube, well known from the JDC center beam LEDs. The JDC Strobe LEDs emit into the same lens tube as the RGB Pixel Mapping LEDs and also offer a segmentation of 25 mm for stunning dynamic effects. The idea to emit the powerful strobe and the RGB Pixel mapping output through the same lens tube creates a very nice look and avoids seeing ugly separate LEDs or light reflections from white face LEDs.

The smart rigging accessories such as rigging bracket and alignment bracket provide a convenient handling of the product. The smart rigging accessories such as rigging bracket and alignment bracket provide a convenient handling of the product. Using the alignment bracket, multiple devices can be easily mechanically connected together while the rigging bracket allows an installation of rigging clamps on the top, button, and back side of the product. A clever airflow design allows the cooling of the fixture also when lying on the ground, installed between objects or on top of each other.

GLP JDC Line 10002025-09-16T11:08:04-07:00

GrandMA 2 Full

ma2Full

Equipped with the most up-to-date technology and even some special features (e.g. keyboard drawer and multi-touch command screen), the grandMA2 is suitable for all lighting segments. It supplies an intuitive and fast control of all connected fixtures and channels. Furthermore the grandMA2 fader wing provides up to 60 extra motorized executor faders for an almost unlimited number of pages.
Moreover grandMA series 1-showfiles can be converted to be used with the grandMA2. And for yet easier operation, all command keys can be found in the same place on every console of the grandMA2 series. The grandMA2 offers extremely flexible and comfortable ways of programming, including nearly infinite numbers of presets, cues, pages, sequences and effects.

GrandMA 2 Full2021-10-11T12:53:35-07:00

GrandMA2 Light

ma2Lite

The grandMA2 light is the perfect tool to control all kinds of lighting genres like conventionals, moving lights, LEDs, video and media. It supplies an intuitive and fast control of all connected fixtures and channels. The grandMA2 light can handle an almost infinite number of presets, cues, pages, sequences and effects. It is ideally suited as a standalone console or as a backup device for the grandMA2 full-size. Moreover grandMA series 1-showfiles can be converted to be used with the grandMA2.

GrandMA2 Light2021-10-11T12:53:48-07:00

Hasebase Base*Low*Pro

The baselowpro from hazebase is a CO2 low fogger like no other. Create amazing low lying fog when used with either the hazebase baseclassic or basehigh*power foggers.

Dense low fog
Automatic and user defined programs
Control through DMX, Ethernet or Analog
Operated with external CO2 bottle
Fog height controlled via adjustable air supply
Full Color touchscreen display

Easy to find and use, the baselowpro utilizes liquid CO2.

adjustable CO2 consumption per minute: 1kg, 2kg, 3kg

Hasebase Base*Low*Pro2021-10-11T12:54:05-07:00

Hazebase TOURING2

The Base Touring2 is the machine for the professional who needs ultimate output and control. The high-output units features a built-in 450W fan, allowing the dense output to be pushed further and quicker than previously seen.

Utilizing the clever air diverter positioned at the front of the unit, It now becomes a huge haze effect filling stadiums in a fraction of the time. The Base Touring2 reaches operation in less than 14 minutes. It can be controlled via DMX using only one channel or a built-in onboard timer. Wired and wireless controllers are also available.

Hazebase water-based fluid is designed for any environment. From a quick dissipation to a dense fog that hangs in the air. The unit can run continuously at 50%.

Hazebase TOURING22025-12-16T14:14:02-07:00
© 2021 Felix Lighting | All Rights Reserved
Go to Top